Remove trailing whitespaces

tests/various/dynamic_part_select/latch_002.v

@@ -5,7 +5,7 @@ module latch_002
    input wire [7:0]  vect;
    input wire [7:0]  sel;
    input wire        st;
-   
+
    always @(*) begin
       if (st)
 	dword[8*sel +:8] <= vect[7:0];

tests/various/dynamic_part_select/multiple_blocking.v

@@ -5,7 +5,7 @@ module multiple_blocking #(parameter WIDTH=32, SELW=1, CTRLW=$clog2(WIDTH), DINW
     input wire [DINW-1:0]  din,
     input wire [SELW-1:0]  sel,
     output reg [WIDTH-1:0] dout);
-   
+
    localparam SLICE = WIDTH/(SELW**2);
    reg [CTRLW:0] 	   a;
    reg [SELW-1:0] 	   b;

tests/various/dynamic_part_select/nonblocking.v

@@ -5,11 +5,11 @@ module nonblocking #(parameter WIDTH=32, SELW=1, CTRLW=$clog2(WIDTH), DINW=2**SE
     input wire [DINW-1:0]  din,
     input wire [SELW-1:0]  sel,
     output reg [WIDTH-1:0] dout);
-   
+
    localparam SLICE = WIDTH/(SELW**2);
    always @(posedge clk) begin
       dout <= dout + 1;
       dout[ctrl*sel+:SLICE] <= din ;
    end
-   
+
 endmodule

tests/various/dynamic_part_select/reset_test.v

@@ -6,7 +6,7 @@ module reset_test  #(parameter WIDTH=32, SELW=1, CTRLW=$clog2(WIDTH), DINW=2**SE
     input wire [DINW-1:0]  din,
     input wire [SELW-1:0]  sel,
     output reg [WIDTH-1:0] dout);
-   
+
    reg [SELW:0] 		   i;
    wire [SELW-1:0] 	   rval = {reset, {SELW-1{1'b0}}};
    localparam SLICE = WIDTH/(SELW**2);

tests/various/dynamic_part_select/reversed.v

@@ -5,7 +5,7 @@ module reversed #(parameter WIDTH=32, SELW=4, CTRLW=$clog2(WIDTH), DINW=2**SELW)
     input wire [DINW-1:0]  din,
     input wire [SELW-1:0]  sel,
     output reg [WIDTH-1:0] dout);
-   
+
    localparam SLICE = WIDTH/(SELW**2);
    always @(posedge clk) begin
       dout[(WIDTH-ctrl*sel)-:SLICE] <= din;