mirror of
https://github.com/YosysHQ/sby.git
synced 2025-11-04 06:39:11 +00:00
8da6f07cb3
Organize tests into subdirectories and use a new makefile that scans .sby files and allows selecting tests by mode, engine, solver and/or subdirectory. Automatically skips tests that use engines/solvers that are not found in the PATH. See `cd tests; make help` for a description of supported make targets.
73 lines
1.9 KiB
Verilog
73 lines
1.9 KiB
Verilog
module prv32fmcmp (
|
|
input clock,
|
|
input resetn,
|
|
output mem_valid_a, mem_valid_b,
|
|
output mem_instr_a, mem_instr_b,
|
|
input mem_ready_a, mem_ready_b,
|
|
output [31:0] mem_addr_a, mem_addr_b,
|
|
output [31:0] mem_wdata_a, mem_wdata_b,
|
|
output [ 3:0] mem_wstrb_a, mem_wstrb_b,
|
|
input [31:0] mem_rdata_a, mem_rdata_b
|
|
);
|
|
picorv32 #(
|
|
.REGS_INIT_ZERO(1),
|
|
.COMPRESSED_ISA(1)
|
|
) prv32_a (
|
|
.clk (clock ),
|
|
.resetn (resetn ),
|
|
.mem_valid (mem_valid_a),
|
|
.mem_instr (mem_instr_a),
|
|
.mem_ready (mem_ready_a),
|
|
.mem_addr (mem_addr_a ),
|
|
.mem_wdata (mem_wdata_a),
|
|
.mem_wstrb (mem_wstrb_a),
|
|
.mem_rdata (mem_rdata_a)
|
|
);
|
|
|
|
picorv32 #(
|
|
.REGS_INIT_ZERO(1),
|
|
.COMPRESSED_ISA(1)
|
|
) prv32_b (
|
|
.clk (clock ),
|
|
.resetn (resetn ),
|
|
.mem_valid (mem_valid_b),
|
|
.mem_instr (mem_instr_b),
|
|
.mem_ready (mem_ready_b),
|
|
.mem_addr (mem_addr_b ),
|
|
.mem_wdata (mem_wdata_b),
|
|
.mem_wstrb (mem_wstrb_b),
|
|
.mem_rdata (mem_rdata_b)
|
|
);
|
|
|
|
reg [31:0] rom [0:255];
|
|
|
|
integer mem_access_cnt_a = 0;
|
|
integer mem_access_cnt_b = 0;
|
|
|
|
always @* begin
|
|
assume(resetn == !$initstate);
|
|
|
|
if (resetn) begin
|
|
// only consider programs without data memory read/write
|
|
if (mem_valid_a) assume(mem_instr_a);
|
|
if (mem_valid_b) assume(mem_instr_b);
|
|
|
|
// when the access cnt matches, the addresses must match
|
|
if (mem_valid_a && mem_valid_b && mem_access_cnt_a == mem_access_cnt_b) begin
|
|
assert(mem_addr_a == mem_addr_b);
|
|
end
|
|
|
|
// hook up to memory
|
|
assume(mem_rdata_a == rom[mem_addr_a[9:2]]);
|
|
assume(mem_rdata_b == rom[mem_addr_b[9:2]]);
|
|
end
|
|
|
|
// it will pass when this is enabled
|
|
//assume(mem_ready_a == mem_ready_b);
|
|
end
|
|
|
|
always @(posedge clock) begin
|
|
mem_access_cnt_a <= mem_access_cnt_a + (resetn && mem_valid_a && mem_ready_a);
|
|
mem_access_cnt_b <= mem_access_cnt_b + (resetn && mem_valid_b && mem_ready_b);
|
|
end
|
|
endmodule
|