yosys/tests/arch/nanoxplore/lutram.ys

# Dual-port RAMs.
# NX_RFB_U in mode 0 (DPREG)

read_verilog <<EOT
module lutram_dpreg
#(parameter D_WIDTH=18, A_WIDTH=5)
(
	input [D_WIDTH-1:0] data,
	input [A_WIDTH:1] addr_w, addr_r,
	input we, clk,
	output reg [D_WIDTH-1:0] q
);
	// Declare the RAM variable
	reg [D_WIDTH-1:0] ram[(2**A_WIDTH)-1:0];

	// Port A
	always @ (posedge clk)
	begin
		if (we)
			ram[addr_w] <= data;
		q <= ram[addr_r];
	end
endmodule
EOT

hierarchy -top lutram_dpreg
proc
memory -nomap
equiv_opt -run :prove -map +/nanoxplore/cells_sim.v -map +/nanoxplore/cells_sim_u.v synth_nanoxplore -noiopad
memory
opt -full

miter -equiv -flatten -make_assert -make_outputs gold gate miter
sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter

design -load postopt
cd lutram_dpreg
stat
select -assert-count 1 t:NX_RFB_U r:mode=0 %i
select -assert-count 18 t:NX_DFF
select -assert-none t:NX_RFB_U t:NX_DFF %% t:* %D

# Single-port RAMs.
# NX_RFB_U in mode 1 (SPREG)
design -reset

read_verilog ../common/lutram.v
hierarchy -top lutram_1w1r -chparam A_WIDTH 5 -chparam D_WIDTH 18
proc
memory -nomap
equiv_opt -run :prove -map +/nanoxplore/cells_sim.v -map +/nanoxplore/cells_sim_u.v synth_nanoxplore -noiopad
memory
opt -full

miter -equiv -flatten -make_assert -make_outputs gold gate miter
sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter

design -load postopt
cd lutram_1w1r
select -assert-count 1 t:NX_RFB_U r:mode=1 %i
select -assert-count 18 t:NX_DFF
select -assert-none t:NX_RFB_U t:NX_DFF %% t:* %D

# Dual-port RAMs.
# NX_RFB_U in mode 2 (NX_XRFB_64x18)
design -reset
read_verilog ../common/lutram.v
hierarchy -top lutram_1w1r -chparam A_WIDTH 6 -chparam D_WIDTH 18
proc
memory -nomap
equiv_opt -run :prove -map +/nanoxplore/cells_sim.v -map +/nanoxplore/cells_sim_u.v synth_nanoxplore -noiopad
memory
opt -full

miter -equiv -flatten -make_assert -make_outputs gold gate miter
sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter

design -load postopt
cd lutram_1w1r
select -assert-count 1 t:NX_RFB_U r:mode=2 %i
select -assert-count 18 t:NX_DFF
select -assert-none t:NX_RFB_U t:NX_DFF %% t:* %D

# Dual-port RAMs.
# NX_RFB_U in mode 3 (NX_XRFB_32x36)
design -reset
read_verilog ../common/lutram.v
hierarchy -top lutram_1w1r -chparam A_WIDTH 5 -chparam D_WIDTH 36
proc
memory -nomap
equiv_opt -run :prove -map +/nanoxplore/cells_sim.v -map +/nanoxplore/cells_sim_u.v synth_nanoxplore -noiopad
memory
opt -full

miter -equiv -flatten -make_assert -make_outputs gold gate miter
sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter

design -load postopt
cd lutram_1w1r
select -assert-count 1 t:NX_RFB_U r:mode=3 %i
select -assert-count 36 t:NX_DFF
select -assert-none t:NX_RFB_U t:NX_DFF %% t:* %D

# Single write dual read RAMs.
# NX_RFB_U in mode 4 (NX_XRFB_2R_1W)
design -reset

read_verilog <<EOT
module lutram_1w2r
#(parameter D_WIDTH=8, A_WIDTH=5)
(
	input [D_WIDTH-1:0] data_a, data_b,
	input [A_WIDTH:1] addr_a, addr_b,
	input we_a, clk,
	output reg [D_WIDTH-1:0] q_a, q_b
);
	// Declare the RAM variable
	reg [D_WIDTH-1:0] ram[(2**A_WIDTH)-1:0];

	// Port A
	always @ (posedge clk)
	begin
		if (we_a)
			ram[addr_a] <= data_a;
		q_a <= ram[addr_a];
		q_b <= ram[addr_b];
	end
endmodule
EOT

hierarchy -top lutram_1w2r -chparam A_WIDTH 5 -chparam D_WIDTH 18
proc
memory -nomap
equiv_opt -run :prove -map +/nanoxplore/cells_sim.v -map +/nanoxplore/cells_sim_u.v synth_nanoxplore -noiopad
memory
opt -full

miter -equiv -flatten -make_assert -make_outputs gold gate miter
sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter

design -load postopt
cd lutram_1w2r
select -assert-count 1 t:NX_RFB_U r:mode=4 %i
select -assert-count 36 t:NX_DFF
select -assert-none t:NX_RFB_U t:NX_DFF %% t:* %D