yosys/tests/various/autoname.ys

# prefer output name
design -reset
read_rtlil <<EOT
module \top
  wire output 3 \y
  wire input 1 \a
  wire input 2 \b
  cell $and $name
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \a
    connect \B \b
    connect \Y \y
  end
end
EOT
logger -expect log "Rename cell .name in top to y_.and_Y" 1
logger -expect log "Renamed 1 objects" 1
debug autoname
logger -check-expected

# fallback to shortest name if output is private
design -reset
read_rtlil <<EOT
autoidx 2
module \top
  wire output 3 $y
  wire input 1 \ab
  wire input 2 \abcd
  cell $or $name
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \ab
    connect \B \abcd
    connect \Y $y
  end
end
EOT
logger -expect log "Rename cell .name in top to ab_.or_A" 1
logger -expect log "Renamed 1 objects" 1
debug autoname
logger -check-expected

# prefer low fanout over low name length
design -reset
read_rtlil <<EOT
module \top
  wire output 1 $y
  wire input 2 \a
  wire input 3 \bcd
  wire input 4 \c_has_a_long_name
  cell $and $name
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \a
    connect \B \bcd
    connect \Y $y
  end

  cell $or $name2
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \a
    connect \B \c_has_a_long_name
    connect \Y $y
  end
end
EOT
logger -expect log "Rename cell .name in top to bcd_.and_B" 1
logger -expect log "Rename cell .name2 in top to c_has_a_long_name_.or_B" 1
logger -expect log "Renamed 2 objects" 1
debug autoname
logger -check-expected

# names are unique
design -reset
read_rtlil <<EOT
module \top
  wire output 3 \y
  wire input 1 \a
  wire input 2 \b
  cell $and $name
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \a
    connect \B \b
    connect \Y \y
  end

  cell $and $name2
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \a
    connect \B \b
    connect \Y \y
  end
end
EOT
logger -expect log "Rename cell .name in top to y_.and_Y" 1
logger -expect log "Rename cell .name2 in top to y_.and_Y_1" 1
logger -expect log "Renamed 2 objects" 1
debug autoname
logger -check-expected

# wires get autonames too
design -reset
read_rtlil <<EOT
module \top
  wire output 1 $y
  wire input 2 \a
  wire input 3 \bcd
  wire $c
  wire $d
  wire $e
  cell $__unknown $name
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \a
    connect \B \bcd
    connect \Y $c
  end

  cell $or \or
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A \a
    connect \B \bcd
    connect \Y $d
  end

  cell $or $name2
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A $c
    connect \B $d
    connect \Y $e
  end

  cell $and $name3
    parameter \A_SIGNED 0
    parameter \A_WIDTH 1
    parameter \B_SIGNED 0
    parameter \B_WIDTH 1
    parameter \Y_WIDTH 1
    connect \A $c
    connect \B $e
    connect \Y $y
  end
end
EOT
design -save order_test

# wires are named for being cell outputs
logger -expect log "Rename wire .d in top to or_Y" 1
logger -expect log "Rename cell .name2 in top to or_Y_.or_B" 1
logger -expect log "Renamed 2 objects" 1
debug autoname t:$or
logger -check-expected

# $name gets shortest name (otherwise bcd_$__unknown_B)
logger -expect log "Rename cell .name in top to a_.__unknown_A" 1
# another output wire
logger -expect log "Rename wire .e in top to or_Y_.or_B_Y" 1
logger -expect log "Renamed 4 objects" 1
debug autoname
logger -check-expected

# don't rename prematurely (some objects should be named after $name2)
design -load order_test

# $c gets shortest name, since the cell driving it doesn't have known port
# directions (otherwise a_$__unknown_A_Y)
logger -expect log "Rename wire .c in top to or_Y_.or_B_A" 1
# $name3 named for lowest fanout wire (otherwise a_$__unknown_A_Y_$and_A)
logger -expect log "Rename cell .name3 in top to or_Y_.or_B_Y_.and_B" 1
logger -expect log "Renamed 6 objects" 1
debug autoname
logger -check-expected