mirrors/yosys
3
0
Fork 0
mirror of https://github.com/YosysHQ/yosys synced 2025-10-31 11:42:30 +00:00
Code Activity
yosys/tests/opt/memory_dff_trans.ys
Marcelina Kościelnicka 1f74ec3535 memory_share: Add -nosat and -nowiden options. 
This unlocks wide port recognition by default.
2021-08-14 00:09:04 +02:00

874 lines
14 KiB
Text
Raw Blame History

# Good case 1: single port.
read_verilog << EOT
module top(
input [3:0] addr,
input [3:0] wd,
input we,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we) begin
mem[addr] <= wd;
rd <= wd;
end else begin
rd <= mem[addr];
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=1'b1 r:RD_COLLISION_X_MASK=1'b0 %i %i
design -reset
# Good case 2: single port, exclusive.
read_verilog << EOT
module top(
input [3:0] addr,
input [3:0] wd,
input we,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we) begin
mem[addr] <= wd;
end else begin
rd <= mem[addr];
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=1'b0 r:RD_COLLISION_X_MASK=1'b1 %i %i
design -reset
# Good case 3: proper bypass muxes.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= wd1;
if (we2 && wa2 == ra)
rd <= wd2;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b11 r:RD_COLLISION_X_MASK=2'b00 %i %i
design -reset
# Good case 4: proper bypass mux, but only one.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= wd1;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b01 r:RD_COLLISION_X_MASK=2'b00 %i %i
design -reset
# Good case 5: proper bypass mux, but the other one.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we2 && wa2 == ra)
rd <= wd2;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b10 r:RD_COLLISION_X_MASK=2'b00 %i %i
design -reset
# Good case 6: 'x mux.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= 4'hx;
if (we2 && wa2 == ra)
rd <= wd2;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b10 r:RD_COLLISION_X_MASK=2'b01 %i %i
design -reset
# Good case 7: uncollidable addresses.
read_verilog << EOT
module top(
input [3:0] addr,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
wire [3:0] wa1 = addr;
wire [3:0] wa2 = addr + 1;
wire [3:0] ra = addr + 2;
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b00 r:RD_COLLISION_X_MASK=2'b11 %i %i
design -reset
# Good case 8: uncollidable addresses, but still have soft transparency logic.
read_verilog << EOT
module top(
input [3:0] addr,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
wire [3:0] wa1 = addr;
wire [3:0] wa2 = addr + 1;
wire [3:0] ra = addr + 2;
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= wd1;
if (we2 && wa2 == ra)
rd <= wd2;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b00 r:RD_COLLISION_X_MASK=2'b11 %i %i
design -reset
# Bad case 1: broken bypass signal.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= wd1;
if (we2 && wa2 == ra && we1)
rd <= wd2;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
logger -expect log "FF found, but with a mux select that doesn't seem to correspond to transparency logic" 1
memory_dff
logger -check-expected
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_CLK_ENABLE=1'b0 %i
design -reset
# Bad case 2: bad data signal.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= wd1;
if (we2 && wa2 == ra)
rd <= wd1;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
logger -expect log "FF found, but with a mux data input that doesn't seem to correspond to transparency logic" 1
memory_dff
logger -check-expected
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_CLK_ENABLE=1'b0 %i
design -reset
# Bad case 3: priority mismatch.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we2 && wa2 == ra)
rd <= wd2;
if (we1 && wa1 == ra)
rd <= wd1;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
logger -expect log "FF found, but transparency logic priority doesn't match write priority." 1
memory_dff
logger -check-expected
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_CLK_ENABLE=1'b0 %i
design -reset
# Good case 10: priority mismatch, but since the second value is 'x, it's still OK.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we2 && wa2 == ra)
rd <= wd2;
if (we1 && wa1 == ra)
rd <= 4'hx;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b10 r:RD_COLLISION_X_MASK=2'b01 %i %i
design -reset
# Good case 11: priority mismatch, but since three-way collision cannot happen, it's still OK.
read_verilog << EOT
module top(
input [3:0] addr,
input [1:0] mode,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] wa1, wa2, ra;
always @* begin
case (mode)
0: begin
wa1 = addr+1;
wa2 = addr;
ra = addr;
end
1: begin
wa1 = addr;
wa2 = addr+1;
ra = addr;
end
2: begin
wa1 = addr;
wa2 = addr;
ra = addr+1;
end
3: begin
wa1 = addr;
wa2 = addr+1;
ra = addr+2;
end
endcase
end
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we2 && wa2 == ra)
rd <= wd2;
if (we1 && wa1 == ra)
rd <= wd1;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b11 r:RD_COLLISION_X_MASK=2'b00 %i %i
design -reset
# Bad case 4: half of the port is transparent.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2] <= wd2;
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= wd1;
if (we2 && wa2 == ra)
rd[3:2] <= wd2[3:2];
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
logger -expect log "FF found, but soft transparency logic is inconsistent for port 1." 1
memory_dff
logger -check-expected
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_CLK_ENABLE=1'b0 %i
design -reset
# Good case 12: like above, but the other bits aren't changed by the port anyway.
read_verilog << EOT
module top(
input [3:0] ra,
input [3:0] wa1,
input [3:0] wa2,
input [3:0] wd1,
input [3:0] wd2,
input we1, we2,
input re,
input clk,
output reg [3:0] rd,
);
reg [3:0] mem[0:15];
always @(posedge clk) begin
if (we1)
mem[wa1] <= wd1;
if (we2)
mem[wa2][3:2] <= wd2[3:2];
if (re) begin
rd <= mem[ra];
if (we1 && wa1 == ra)
rd <= wd1;
if (we2 && wa2 == ra)
rd[3:2] <= wd2[3:2];
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=2'b11 r:RD_COLLISION_X_MASK=2'b00 %i %i
design -reset
# Good case 13: wide read, narrow write.
read_verilog << EOT
module top(
input [7:0] addr,
input [7:0] wd,
input we,
input re,
input clk,
output reg [31:0] rd,
);
reg [7:0] mem[0:255];
always @(posedge clk) begin
if (we)
mem[addr] <= wd;
if (re) begin
rd[7:0] <= mem[{addr[7:2], 2'b00}];
rd[15:8] <= mem[{addr[7:2], 2'b01}];
rd[23:16] <= mem[{addr[7:2], 2'b10}];
rd[31:24] <= mem[{addr[7:2], 2'b11}];
case ({we, addr[1:0]})
3'b100: rd[7:0] <= wd;
3'b101: rd[15:8] <= wd;
3'b110: rd[23:16] <= wd;
3'b111: rd[31:24] <= wd;
endcase
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
dump
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=4'b1111 r:RD_COLLISION_X_MASK=4'b0000 %i %i
memory_share
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=4'b1111 r:RD_COLLISION_X_MASK=4'b0000 %i %i
select -assert-count 1 t:$mem_v2 r:RD_WIDE_CONTINUATION=4'b1110 %i
design -reset
# Good case 14: narrow read, wide write.
read_verilog << EOT
module top(
input [7:0] addr,
input [31:0] wd,
input we,
input re,
input clk,
output reg [7:0] rd,
);
reg [7:0] mem[0:255];
always @(posedge clk) begin
if (we) begin
mem[{addr[7:2], 2'b00}] <= wd[7:0];
mem[{addr[7:2], 2'b01}] <= wd[15:8];
mem[{addr[7:2], 2'b10}] <= wd[23:16];
mem[{addr[7:2], 2'b11}] <= wd[31:24];
end
if (re) begin
rd <= mem[addr];
case ({we, addr[1:0]})
3'b100: rd <= wd[7:0];
3'b101: rd <= wd[15:8];
3'b110: rd <= wd[23:16];
3'b111: rd <= wd[31:24];
endcase
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
dump
memory_dff
memory_collect
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=4'b1111 r:RD_COLLISION_X_MASK=4'b0000 %i %i
memory_share
select -assert-count 1 t:$mem_v2
select -assert-count 1 t:$mem_v2 r:RD_TRANSPARENCY_MASK=4'b1111 r:RD_COLLISION_X_MASK=4'b0000 %i %i
select -assert-count 1 t:$mem_v2 r:WR_WIDE_CONTINUATION=4'b1110 %i
design -reset
# Good case 15: wide read, wide write.
read_verilog << EOT
module top(
input [7:0] addr,
input [31:0] wd,
input we,
input re,
input clk,
output reg [31:0] rd,
);
reg [7:0] mem[0:255];
always @(posedge clk) begin
if (we) begin
mem[{addr[7:2], 2'b00}] <= wd[7:0];
mem[{addr[7:2], 2'b01}] <= wd[15:8];
mem[{addr[7:2], 2'b10}] <= wd[23:16];
mem[{addr[7:2], 2'b11}] <= wd[31:24];
end
if (re) begin
rd[7:0] <= mem[{addr[7:2], 2'b00}];
rd[15:8] <= mem[{addr[7:2], 2'b01}];
rd[23:16] <= mem[{addr[7:2], 2'b10}];
rd[31:24] <= mem[{addr[7:2], 2'b11}];
if (we)
rd <= wd;
end
end
endmodule
EOT
hierarchy -auto-top
proc
opt_dff
opt_clean
dump
memory_dff
select -assert-count 4 t:$memrd_v2
select -assert-count 1 t:$memrd_v2 r:TRANSPARENCY_MASK=4'b0001 r:COLLISION_X_MASK=4'b1110 %i %i
select -assert-count 1 t:$memrd_v2 r:TRANSPARENCY_MASK=4'b0010 r:COLLISION_X_MASK=4'b1101 %i %i
select -assert-count 1 t:$memrd_v2 r:TRANSPARENCY_MASK=4'b0100 r:COLLISION_X_MASK=4'b1011 %i %i
select -assert-count 1 t:$memrd_v2 r:TRANSPARENCY_MASK=4'b1000 r:COLLISION_X_MASK=4'b0111 %i %i
memory_share
select -assert-count 1 t:$memrd_v2
select -assert-count 1 t:$memwr_v2
select -assert-count 1 t:$memrd_v2 r:TRANSPARENCY_MASK=1'b1 r:COLLISION_X_MASK=1'b0 %i %i
design -reset
View git blame Copy permalink