mirror of
https://github.com/YosysHQ/yosys
synced 2025-11-04 05:19:11 +00:00
1374fc2e2b
Most of the word/coarse level cells have an assigned group and individual page. The gate/fine level cells are all on one page. Fix links to `cell_library.rst`.
281 lines
10 KiB
ReStructuredText
281 lines
10 KiB
ReStructuredText
.. role:: verilog(code)
|
|
:language: Verilog
|
|
|
|
.. _sec:memcells:
|
|
|
|
Memories
|
|
~~~~~~~~
|
|
|
|
Memories are either represented using ``RTLIL::Memory`` objects, `$memrd_v2`,
|
|
`$memwr_v2`, and `$meminit_v2` cells, or by `$mem_v2` cells alone.
|
|
|
|
In the first alternative the ``RTLIL::Memory`` objects hold the general metadata
|
|
for the memory (bit width, size in number of words, etc.) and for each port a
|
|
`$memrd_v2` (read port) or `$memwr_v2` (write port) cell is created. Having
|
|
individual cells for read and write ports has the advantage that they can be
|
|
consolidated using resource sharing passes. In some cases this drastically
|
|
reduces the number of required ports on the memory cell. In this alternative,
|
|
memory initialization data is represented by `$meminit_v2` cells, which allow
|
|
delaying constant folding for initialization addresses and data until after the
|
|
frontend finishes.
|
|
|
|
The `$memrd_v2` cells have a clock input ``CLK``, an enable input ``EN``, an
|
|
address input ``ADDR``, a data output ``DATA``, an asynchronous reset input
|
|
``ARST``, and a synchronous reset input ``SRST``. They also have the following
|
|
parameters:
|
|
|
|
``MEMID``
|
|
The name of the ``RTLIL::Memory`` object that is associated with this read
|
|
port.
|
|
|
|
``ABITS``
|
|
The number of address bits (width of the ``ADDR`` input port).
|
|
|
|
``WIDTH``
|
|
The number of data bits (width of the ``DATA`` output port). Note that this
|
|
may be a power-of-two multiple of the underlying memory's width -- such ports
|
|
are called wide ports and access an aligned group of cells at once. In this
|
|
case, the corresponding low bits of ``ADDR`` must be tied to 0.
|
|
|
|
``CLK_ENABLE``
|
|
When this parameter is non-zero, the clock is used. Otherwise this read port
|
|
is asynchronous and the ``CLK`` input is not used.
|
|
|
|
``CLK_POLARITY``
|
|
Clock is active on the positive edge if this parameter has the value ``1'b1``
|
|
and on the negative edge if this parameter is ``1'b0``.
|
|
|
|
``TRANSPARENCY_MASK``
|
|
This parameter is a bitmask of write ports that this read port is transparent
|
|
with. The bits of this parameter are indexed by the write port's ``PORTID``
|
|
parameter. Transparency can only be enabled between synchronous ports sharing
|
|
a clock domain. When transparency is enabled for a given port pair, a read
|
|
and write to the same address in the same cycle will return the new value.
|
|
Otherwise the old value is returned.
|
|
|
|
``COLLISION_X_MASK``
|
|
This parameter is a bitmask of write ports that have undefined collision
|
|
behavior with this port. The bits of this parameter are indexed by the write
|
|
port's ``PORTID`` parameter. This behavior can only be enabled between
|
|
synchronous ports sharing a clock domain. When undefined collision is enabled
|
|
for a given port pair, a read and write to the same address in the same cycle
|
|
will return the undefined (all-X) value.This option is exclusive (for a given
|
|
port pair) with the transparency option.
|
|
|
|
``ARST_VALUE``
|
|
Whenever the ``ARST`` input is asserted, the data output will be reset to
|
|
this value. Only used for synchronous ports.
|
|
|
|
``SRST_VALUE``
|
|
Whenever the ``SRST`` input is synchronously asserted, the data output will
|
|
be reset to this value. Only used for synchronous ports.
|
|
|
|
``INIT_VALUE``
|
|
The initial value of the data output, for synchronous ports.
|
|
|
|
``CE_OVER_SRST``
|
|
If this parameter is non-zero, the ``SRST`` input is only recognized when
|
|
``EN`` is true. Otherwise, ``SRST`` is recognized regardless of ``EN``.
|
|
|
|
The `$memwr_v2` cells have a clock input ``CLK``, an enable input ``EN`` (one
|
|
enable bit for each data bit), an address input ``ADDR`` and a data input
|
|
``DATA``. They also have the following parameters:
|
|
|
|
``MEMID``
|
|
The name of the ``RTLIL::Memory`` object that is associated with this write
|
|
port.
|
|
|
|
``ABITS``
|
|
The number of address bits (width of the ``ADDR`` input port).
|
|
|
|
``WIDTH``
|
|
The number of data bits (width of the ``DATA`` output port). Like with
|
|
`$memrd_v2` cells, the width is allowed to be any power-of-two multiple of
|
|
memory width, with the corresponding restriction on address.
|
|
|
|
``CLK_ENABLE``
|
|
When this parameter is non-zero, the clock is used. Otherwise this write port
|
|
is asynchronous and the ``CLK`` input is not used.
|
|
|
|
``CLK_POLARITY``
|
|
Clock is active on positive edge if this parameter has the value ``1'b1`` and
|
|
on the negative edge if this parameter is ``1'b0``.
|
|
|
|
``PORTID``
|
|
An identifier for this write port, used to index write port bit mask
|
|
parameters.
|
|
|
|
``PRIORITY_MASK``
|
|
This parameter is a bitmask of write ports that this write port has priority
|
|
over in case of writing to the same address. The bits of this parameter are
|
|
indexed by the other write port's ``PORTID`` parameter. Write ports can only
|
|
have priority over write ports with lower port ID. When two ports write to
|
|
the same address and neither has priority over the other, the result is
|
|
undefined. Priority can only be set between two synchronous ports sharing
|
|
the same clock domain.
|
|
|
|
The `$meminit_v2` cells have an address input ``ADDR``, a data input ``DATA``,
|
|
with the width of the ``DATA`` port equal to ``WIDTH`` parameter times ``WORDS``
|
|
parameter, and a bit enable mask input ``EN`` with width equal to ``WIDTH``
|
|
parameter. All three of the inputs must resolve to a constant for synthesis to
|
|
succeed.
|
|
|
|
``MEMID``
|
|
The name of the ``RTLIL::Memory`` object that is associated with this
|
|
initialization cell.
|
|
|
|
``ABITS``
|
|
The number of address bits (width of the ``ADDR`` input port).
|
|
|
|
``WIDTH``
|
|
The number of data bits per memory location.
|
|
|
|
``WORDS``
|
|
The number of consecutive memory locations initialized by this cell.
|
|
|
|
``PRIORITY``
|
|
The cell with the higher integer value in this parameter wins an
|
|
initialization conflict.
|
|
|
|
The HDL frontend models a memory using ``RTLIL::Memory`` objects and
|
|
asynchronous `$memrd_v2` and `$memwr_v2` cells. The `memory` pass (i.e. its
|
|
various sub-passes) migrates `$dff` cells into the `$memrd_v2` and `$memwr_v2`
|
|
cells making them synchronous, then converts them to a single `$mem_v2` cell and
|
|
(optionally) maps this cell type to `$dff` cells for the individual words and
|
|
multiplexer-based address decoders for the read and write interfaces. When the
|
|
last step is disabled or not possible, a `$mem_v2` cell is left in the design.
|
|
|
|
The `$mem_v2` cell provides the following parameters:
|
|
|
|
``MEMID``
|
|
The name of the original ``RTLIL::Memory`` object that became this `$mem_v2`
|
|
cell.
|
|
|
|
``SIZE``
|
|
The number of words in the memory.
|
|
|
|
``ABITS``
|
|
The number of address bits.
|
|
|
|
``WIDTH``
|
|
The number of data bits per word.
|
|
|
|
``INIT``
|
|
The initial memory contents.
|
|
|
|
``RD_PORTS``
|
|
The number of read ports on this memory cell.
|
|
|
|
``RD_WIDE_CONTINUATION``
|
|
This parameter is ``RD_PORTS`` bits wide, containing a bitmask of "wide
|
|
continuation" read ports. Such ports are used to represent the extra data
|
|
bits of wide ports in the combined cell, and must have all control signals
|
|
identical with the preceding port, except for address, which must have the
|
|
proper sub-cell address encoded in the low bits.
|
|
|
|
``RD_CLK_ENABLE``
|
|
This parameter is ``RD_PORTS`` bits wide, containing a clock enable bit for
|
|
each read port.
|
|
|
|
``RD_CLK_POLARITY``
|
|
This parameter is ``RD_PORTS`` bits wide, containing a clock polarity bit for
|
|
each read port.
|
|
|
|
``RD_TRANSPARENCY_MASK``
|
|
This parameter is ``RD_PORTS*WR_PORTS`` bits wide, containing a concatenation
|
|
of all ``TRANSPARENCY_MASK`` values of the original `$memrd_v2` cells.
|
|
|
|
``RD_COLLISION_X_MASK``
|
|
This parameter is ``RD_PORTS*WR_PORTS`` bits wide, containing a concatenation
|
|
of all ``COLLISION_X_MASK`` values of the original `$memrd_v2` cells.
|
|
|
|
``RD_CE_OVER_SRST``
|
|
This parameter is ``RD_PORTS`` bits wide, determining relative synchronous
|
|
reset and enable priority for each read port.
|
|
|
|
``RD_INIT_VALUE``
|
|
This parameter is ``RD_PORTS*WIDTH`` bits wide, containing the initial value
|
|
for each synchronous read port.
|
|
|
|
``RD_ARST_VALUE``
|
|
This parameter is ``RD_PORTS*WIDTH`` bits wide, containing the asynchronous
|
|
reset value for each synchronous read port.
|
|
|
|
``RD_SRST_VALUE``
|
|
This parameter is ``RD_PORTS*WIDTH`` bits wide, containing the synchronous
|
|
reset value for each synchronous read port.
|
|
|
|
``WR_PORTS``
|
|
The number of write ports on this memory cell.
|
|
|
|
``WR_WIDE_CONTINUATION``
|
|
This parameter is ``WR_PORTS`` bits wide, containing a bitmask of "wide
|
|
continuation" write ports.
|
|
|
|
``WR_CLK_ENABLE``
|
|
This parameter is ``WR_PORTS`` bits wide, containing a clock enable bit for
|
|
each write port.
|
|
|
|
``WR_CLK_POLARITY``
|
|
This parameter is ``WR_PORTS`` bits wide, containing a clock polarity bit for
|
|
each write port.
|
|
|
|
``WR_PRIORITY_MASK``
|
|
This parameter is ``WR_PORTS*WR_PORTS`` bits wide, containing a concatenation
|
|
of all ``PRIORITY_MASK`` values of the original `$memwr_v2` cells.
|
|
|
|
The `$mem_v2` cell has the following ports:
|
|
|
|
``RD_CLK``
|
|
This input is ``RD_PORTS`` bits wide, containing all clock signals for the
|
|
read ports.
|
|
|
|
``RD_EN``
|
|
This input is ``RD_PORTS`` bits wide, containing all enable signals for the
|
|
read ports.
|
|
|
|
``RD_ADDR``
|
|
This input is ``RD_PORTS*ABITS`` bits wide, containing all address signals
|
|
for the read ports.
|
|
|
|
``RD_DATA``
|
|
This output is ``RD_PORTS*WIDTH`` bits wide, containing all data signals for
|
|
the read ports.
|
|
|
|
``RD_ARST``
|
|
This input is ``RD_PORTS`` bits wide, containing all asynchronous reset
|
|
signals for the read ports.
|
|
|
|
``RD_SRST``
|
|
This input is ``RD_PORTS`` bits wide, containing all synchronous reset
|
|
signals for the read ports.
|
|
|
|
``WR_CLK``
|
|
This input is ``WR_PORTS`` bits wide, containing all clock signals for the
|
|
write ports.
|
|
|
|
``WR_EN``
|
|
This input is ``WR_PORTS*WIDTH`` bits wide, containing all enable signals for
|
|
the write ports.
|
|
|
|
``WR_ADDR``
|
|
This input is ``WR_PORTS*ABITS`` bits wide, containing all address signals
|
|
for the write ports.
|
|
|
|
``WR_DATA``
|
|
This input is ``WR_PORTS*WIDTH`` bits wide, containing all data signals for
|
|
the write ports.
|
|
|
|
The `memory_collect` pass can be used to convert discrete `$memrd_v2`,
|
|
`$memwr_v2`, and `$meminit_v2` cells belonging to the same memory to a single
|
|
`$mem_v2` cell, whereas the `memory_unpack` pass performs the inverse operation.
|
|
The `memory_dff` pass can combine asynchronous memory ports that are fed by or
|
|
feeding registers into synchronous memory ports. The `memory_bram` pass can be
|
|
used to recognize `$mem_v2` cells that can be implemented with a block RAM
|
|
resource on an FPGA. The `memory_map` pass can be used to implement `$mem_v2`
|
|
cells as basic logic: word-wide DFFs and address decoders.
|
|
|
|
.. autocellgroup:: mem
|
|
:members:
|
|
:source:
|
|
:linenos:
|