mirrors/yosys
3
0
Fork 0
mirror of https://github.com/YosysHQ/yosys synced 2025-08-09 12:50:33 +00:00
Code Activity

intel_alm: enable M10K initialisation

Browse source
This commit is contained in:
Lofty 2023-05-25 17:48:48 +01:00
parent ec8d7b1c68
commit cac1bc6fbe
3 changed files with 10 additions and 6 deletions
Download patch file Download diff file Expand all files Collapse all files

8
techlibs/intel_alm/common/mem_sim.v
View file

@ -3,7 +3,7 @@
// In addition to Logic Array Blocks (LABs) that contain ten Adaptive Logic
// Modules (ALMs, see alm_sim.v), the Cyclone V/10GX also contain
// Memory/Logic Array Blocks (MLABs) that can act as either ten ALMs, or utilise
// the memory the ALM uses to store the look-up table data for general usage,
// the memory the ALM uses to store the look-up table data for general usage,
// producing a 32 address by 20-bit block of memory. MLABs are spread out
// around the chip, so they can be placed near where they are needed, rather than
// being comparatively limited in placement for a deep but narrow memory such as
@ -43,7 +43,7 @@
// Quartus will pack external flops into the MLAB, but this is an assumption
// that needs testing.
// The vendor sim model outputs 'x for a very short period (a few
// The vendor sim model outputs 'x for a very short period (a few
// combinational delta cycles) after each write. This has been omitted from
// the following model because it's very difficult to trigger this in practice
// as clock cycles will be much longer than any potential blip of 'x, so the
@ -110,6 +110,8 @@ endmodule
module MISTRAL_M10K(CLK1, A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN);
parameter INIT = 0;
parameter CFG_ABITS = 10;
parameter CFG_DBITS = 10;
@ -119,7 +121,7 @@ input [CFG_DBITS-1:0] A1DATA;
input A1EN, B1EN;
output reg [CFG_DBITS-1:0] B1DATA;
reg [2**CFG_ABITS * CFG_DBITS - 1 : 0] mem = 0;
reg [2**CFG_ABITS * CFG_DBITS - 1 : 0] mem = INIT;
`ifdef cyclonev
specify