Add initial support for both MAX10 and Cyclone IV (E|GX) FPGAs

techlibs/altera_intel/max10/cells_comb_max10.v

@@ -0,0 +1,128 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+ 
+module VCC (output V);
+   assign V = 1'b1;
+endmodule // VCC
+
+module GND (output G);
+   assign G = 1'b0;
+endmodule // GND
+
+/* Altera MAX10 devices Input Buffer Primitive */ 
+module fiftyfivenm_io_ibuf (output o, input i, input ibar);
+   assign ibar = ibar;
+   assign o    = i;
+endmodule // fiftyfivenm_io_ibuf
+
+/* Altera MAX10 devices Output Buffer Primitive */
+module fiftyfivenm_io_obuf (output o, input i, input oe);
+   assign o  = i;
+   assign oe = oe;
+endmodule // fiftyfivenm_io_obuf
+
+/* Altera MAX10 4-input non-fracturable LUT Primitive */ 
+module fiftyfivenm_lcell_comb (output combout, cout,
+                               input  dataa, datab, datac, datad, cin);
+                               
+/* Internal parameters which define the behaviour
+   of the LUT primitive.
+   lut_mask define the lut function, can be expressed in 16-digit bin or hex.
+   sum_lutc_input define the type of LUT (combinational | arithmetic). 
+   dont_touch for retiming || carry options.
+   lpm_type for WYSIWYG */   
+   
+parameter lut_mask = 16'hFFFF;
+parameter dont_touch = "off";
+parameter lpm_type = "fiftyfivenm_lcell_comb";
+parameter sum_lutc_input = "datac";
+  
+reg [1:0] lut_type;  
+reg cout_rt;
+reg combout_rt;
+wire dataa_w;
+wire datab_w;
+wire datac_w;
+wire datad_w;
+wire cin_w;
+
+assign dataa_w = dataa;
+assign datab_w = datab;
+assign datac_w = datac;
+assign datad_w = datad;
+
+function lut_data;
+input [15:0] mask;
+input        dataa, datab, datac, datad;
+reg [7:0]   s3;
+reg [3:0]   s2;
+reg [1:0]   s1;
+  begin
+       s3 = datad ? mask[15:8] : mask[7:0];
+       s2 = datac ?   s3[7:4]  :   s3[3:0];
+       s1 = datab ?   s2[3:2]  :   s2[1:0];
+       lut_data = dataa ? s1[1] : s1[0];
+  end
+
+endfunction
+
+initial begin
+    if (sum_lutc_input == "datac") lut_type = 0;
+    else 
+    if (sum_lutc_input == "cin")   lut_type = 1;
+    else begin
+      $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input);
+      $finish();
+    end
+end
+
+always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin
+    if (lut_type == 0) begin // logic function
+        combout_rt = lut_data(lut_mask, dataa_w, datab_w, 
+                            datac_w, datad_w);
+    end
+    else if (lut_type == 1) begin // arithmetic function
+        combout_rt = lut_data(lut_mask, dataa_w, datab_w, 
+                            cin_w, datad_w);
+    end
+    cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0);
+end
+
+assign combout = combout_rt & 1'b1;
+assign cout = cout_rt & 1'b1;
+
+endmodule // fiftyfivenm_lcell_comb
+
+/* Altera MAX10 D Flip-Flop Primitive */
+// TODO: Implement advanced simulation functions
+module dffeas ( output q, 
+                input d, clk, clrn, prn, ena, 
+		input asdata, aload, sclr, sload );
+  								     
+parameter power_up="dontcare";
+parameter is_wysiwyg="false";
+  reg q;
+
+  always @(posedge clk)
+    q <= d;
+   
+endmodule
+
+
+