Added Yosys Manual

manual/FILES_Eval/run-it.sh

@@ -0,0 +1,74 @@
+#!/bin/bash
+
+openmsp430_mods="
+omsp_alu
+omsp_clock_module
+omsp_dbg
+omsp_dbg_uart
+omsp_execution_unit
+omsp_frontend
+omsp_mem_backbone
+omsp_multiplier
+omsp_register_file
+omsp_sfr
+omsp_sync_cell
+omsp_sync_reset
+omsp_watchdog
+openMSP430"
+
+or1200_mods="
+or1200_alu
+or1200_amultp2_32x32
+or1200_cfgr
+or1200_ctrl
+or1200_dc_top
+or1200_dmmu_tlb
+or1200_dmmu_top
+or1200_du
+or1200_except
+or1200_fpu
+or1200_freeze
+or1200_ic_fsm
+or1200_ic_ram
+or1200_ic_tag
+or1200_ic_top
+or1200_if
+or1200_immu_tlb
+or1200_lsu
+or1200_mem2reg
+or1200_mult_mac
+or1200_operandmuxes
+or1200_pic
+or1200_pm
+or1200_qmem_top
+or1200_reg2mem
+or1200_rf
+or1200_sb
+or1200_sprs
+or1200_top
+or1200_tt
+or1200_wbmux"
+
+yosys_cmds="hierarchy -check; proc; opt; fsm; opt; memory; opt; techmap; opt; abc; opt"
+
+yosys -p "$yosys_cmds" -o openmsp430_ys.v $( cut -f2 -d'"' openmsp430.prj )
+yosys -p "$yosys_cmds" -o or1200_ys.v $( cut -f2 -d'"' or1200.prj )
+
+. /opt/Xilinx/14.5/ISE_DS/settings64.sh
+
+run_single() {
+	prj_file=$1 top_module=$2 out_file=$3
+	sed "s/@prj_file@/$prj_file/g; s/@out_file@/$out_file/g; s/@top_module@/$top_module/g;" < settings.xst > ${out_file}.xst
+	xst -ifn ${out_file}.xst -ofn ${out_file}.syr
+}
+
+for mod in $openmsp430_mods; do
+	run_single openmsp430.prj ${mod} ${mod}
+	run_single openmsp430_ys.prj ${mod} ${mod}_ys
+done
+
+for mod in $or1200_mods; do
+	run_single or1200.prj ${mod} ${mod}
+	run_single or1200_ys.prj ${mod} ${mod}_ys
+done
+