ecp5: Adding DRAM map

Signed-off-by: David Shah <davey1576@gmail.com>

techlibs/ecp5/cells_sim.v

@@ -52,7 +52,7 @@ module TRELLIS_RAM16X2 (
 	input RAD0, RAD1, RAD2, RAD3,
 	output DO0, DO1
 );
-  parameter WCKMUX = "WCK";
+  	parameter WCKMUX = "WCK";
 	parameter WREMUX = "WRE";
 	parameter INITVAL_0 = 16'h0000;
 	parameter INITVAL_1 = 16'h0000;
@@ -87,6 +87,41 @@ endmodule
 
 // ---------------------------------------
 
+module TRELLIS_DPR16X4 (
+	input [3:0] DI,
+	input [3:0] WAD,
+	input WRE, WCK,
+	input [3:0] RAD,
+	output [3:0] DO
+);
+  	parameter WCKMUX = "WCK";
+	parameter WREMUX = "WRE";
+	parameter [63:0] INITVAL = 64'h0000000000000000;
+
+	reg [3:0] mem[15:0];
+
+	integer i;
+	initial begin
+		for (i = 0; i < 16; i = i + 1)
+			mem[i] <= INITVAL[4*i :+ 4];
+	end
+
+	wire muxwck = (WCKMUX == "INV") ? ~WCK : WCK;
+
+	wire muxwre = (WREMUX == "1") ? 1'b1 :
+							  (WREMUX == "0") ? 1'b0 :
+							  (WREMUX == "INV") ? ~WRE :
+							  WRE;
+
+	always @(posedge muxwck)
+		if (muxwre)
+			mem[WAD] <= DI;
+
+	assign DO = mem[RAD];
+endmodule
+
+// ---------------------------------------
+
 module DPR16X4C (
 		input [3:0] DI,
 		input WCK, WRE,

techlibs/ecp5/dram.txt

@@ -0,0 +1,12 @@
+bram $__TRELLIS_DPR16X4
+  init 1
+  abits 4
+  dbits 4
+  groups 2
+  ports  1 1
+  wrmode 0 1
+  enable 0 1
+  transp 0 0
+  clocks 0 1
+  clkpol 0 2
+endbram

techlibs/ecp5/drams_map.v

@@ -0,0 +1,28 @@
+module \$__TRELLIS_DPR16X4 (CLK1, A1ADDR, A1DATA, B1ADDR, B1DATA, B1EN);
+	parameter [63:0] INIT = 64'bx;
+	parameter CLKPOL2 = 1;
+	input CLK1;
+
+	input [3:0] A1ADDR;
+	output [3:0] A1DATA;
+
+	input [3:0] B1ADDR;
+	input [3:0] B1DATA;
+	input B1EN;
+
+	localparam WCKMUX = CLKPOL2 ? "WCK" : "INV";
+
+	TRELLIS_DPR16X4 #(
+		.INITVAL(INIT),
+		.WCKMUX(WCKMUX),
+		.WREMUX("WRE")
+	) _TECHMAP_REPLACE_ (
+		.RAD(A1ADDR),
+		.DO(A1DATA),
+
+		.WAD(B1ADDR),
+		.DI(B1DATA),
+		.WCK(CLK1),
+		.WRE(B1EN)
+	);
+endmodule